cpdavis Posted September 12, 2006 Posted September 12, 2006 Hi, all.I have recently found this site and registered today. My concern is a rattle that I thought was inside driver's door, but am convinced now that it is in the area around the top seat belt mount. Reading some of the posts I notice this has been noted, and sounds like a big job to rectify. My car is a 52 reg LX hDI version, just purchased from Citroen main dealer. Please could someone let me know what the fix involves, so at least I have insight to problem prior to visit to dealer. Regards, Colin. Quote
Badlass Posted September 12, 2006 Posted September 12, 2006 The fix for me only took about an hour...they renewed rivets and put some mastic in...I know some members had the head lining removed, but it's better to have it rectified than put up with it. Lx Quote
cpdavis Posted September 12, 2006 Author Posted September 12, 2006 The fix for me only took about an hour...they renewed rivets and put some mastic in...I know some members had the head lining removed, but it's better to have it rectified than put up with it. LxBadlass, Thanks for this, but could you give a little more detail of what is actually required, where are these rivets you had replaced? Regards, Colin Quote
Badlass Posted September 13, 2006 Posted September 13, 2006 As I wasn't there I'm not entirely sure where but I believe they were around the roof and pillar adjoin. Whatever they did it rectified it...Why don't you ask your garage what they intend to do to fix it?? Lx Quote
cpdavis Posted September 17, 2006 Author Posted September 17, 2006 As I wasn't there I'm not entirely sure where but I believe they were around the roof and pillar adjoin. Whatever they did it rectified it...Why don't you ask your garage what they intend to do to fix it?? LxHi, Badlass, Have spoken to the dealer, and they are going to sort it out next Tuesday. Apparently one of their fitters is well versed with this problem, and will sort it out while I wait. Thanks for your help. Colin. Quote
iannez Posted September 18, 2006 Posted September 18, 2006 its where the inner b-post panel lies over the top of the inner roof panel. they just need prising away from each other with a screwdrive. Quote
cpdavis Posted September 27, 2006 Author Posted September 27, 2006 The car was returned to selling dealer, and after disappearing into their workshop for 45 minutes, re-emerged totally rattle free, Bliss!Thanks to Wyatts of Lymington for this. Regards, Colin. :o Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.