Top pup Posted October 21, 2008 Posted October 21, 2008 Hello folks I'm having problems with a 2.0 hpi, it start and runs fine for about a minute after which it refuses to rev beyond 2000rpm and displays an asr/esp and anti polution fault on the dash. It's been pluged into two different code readers and is coming up with code C1390 on one and P1291 on the other, any pointers on where to start looking? Cheeres guys Quote
beelim Posted October 21, 2008 Posted October 21, 2008 have a look here for the code meanings,http://www.pikit.co.uk/peugeotmt/psa%20eobd%20p%20codes.htmlP1291 Quote from site,For EW10D, SIRIUS81, check the operation of the high pressure fuel pump. This code seems to relate to failure. I have witnessed this fault, with the HP pump dropping pressure off, intermittently, and the regulator trying to increase pressure, as expected. Quote
techbod Posted October 22, 2008 Posted October 22, 2008 P1390 Octane adjust pin out of self test range P1291 Injector High side short to GND or VBATT - Bank 1SIRIUS81 (EW10D)- Fuel pressure regulation fault. Output/Locking.Fuel rail pressure. Low value received.2 P1291 For EW10D, SIRIUS81, check the operation of the high pressure fuel pump. This code seems to relate to failure. I have witnessed this fault, with the HP pump dropping pressure off, intermittently, and the regulator trying to increase pressure, as expected. Quote
techbod Posted October 22, 2008 Posted October 22, 2008 http://i469.photobucket.com/albums/rr53/techbod/1441a30a.jpg 04/07/080600 02 1441 30A INJ CALCULATOR SENSOR EW10D INJECTION01 1938 97 01 CALCULATOR- EW10D INJECTION AND WITHOUT ELECTRONIC STABILITY PROGRAM 1938 Q5RP 1938 WX 0101 - EW10D INJECTION AND ELECTRONIC STABILITY PROGRAM UNTIL RPO No. 09169 1938 HARP 1938 WX 0101 - EW10D INJECTION AND ELECTRONIC STABILITY PROGRAM SINCE RPO No. 09170 UNTIL RPO No. 09610 1938 WX 01 - EW10D INJECTION AND ELECTRONIC STABILITY PROGRAM SINCE RPO No. 09611 02 1922 H1 01 BRACKET- EW10D INJECTION 03 1920 7N 01 SPEED SENSOR- EW10D INJECTION UNTIL RPO No. 09274 1920 FP 01 - EW10D INJECTION SINCE RPO No. 09275 04 0382 L2 01 SHAFT SCREWM6X100-16- EW10D INJECTION 05 1338 A7 01 SENSORM12X150 2 VOIESVE - GREEN- EW10D INJECTION 06 4574 03 01 SENSOR- EW10D INJECTION 07 0357 15 01 SCREW WITH BASEDIAM 6X100-20- EW10D INJECTION 08 5946 31 01 PINKING SENSOR- EW10D INJECTION 09 1920 AE 01 SENSOR- EW10D INJECTION 10 1920 CJ 01 HP PETROL SENS- EW10D INJECTION 11 1920 AK 01 SENSOR PEDAL- EW10D INJECTION 12 1922 H5 01 SENSOR BRACKET- EW10D INJECTION 13 1563 A7 02 FLEXIBLE DOWEL- EW10D INJECTION 14 1920 9G 01 SOLENOID VALVE- EW10D INJECTION 15 1920 CK 01 SOLENOID VALVE- EW10D INJECTION 16 1920 8Y 01 TEMPERAT PROBE- EW10D INJECTION 70 6924 E9 02 SCREW CBLXDIAM 4,5-30 71 6924 10 02 SCREW CBLXDIAM 4,5X20 72 6921 83 01 CAPSCREWDIAM 8X125-35 73 6913 G9 01 SCREWDIAM 6X100-16 74 6936 26 02 HEXAGONAL NUT6X100-5 75 6913 92 02 SOCKET SCREW6X100-14 Quote
Top pup Posted October 22, 2008 Author Posted October 22, 2008 Thanks for the pointers guys, I will see how I get on. Quote
Top pup Posted October 22, 2008 Author Posted October 22, 2008 Techbod what am I looking for in the diagram you posted? Right, the second fault code we got was C1390 not P1390. Anyway we cleared all the codes and ran it again and got P1288 and C1390, the P1288 code appears to relate to the same fault as P1291? Live data from the scanner shows the fuel rail pressure as 30 - 40 bar at tickover and 60 - 70 bar at 2000 rpm, does this sound about right? Has anyone got the specs? Quote
Guest Roger2712 Posted May 4, 2010 Posted May 4, 2010 Hello folks I'm having problems with a 2.0 hpi, it start and runs fine for about a minute after which it refuses to rev beyond 2000rpm and displays an asr/esp and anti polution fault on the dash. It's been pluged into two different code readers and is coming up with code C1390 on one and P1291 on the other, any pointers on where to start looking? Cheeres guysthere is a comn fault its high pressure pump on end of cam shaft it should run at 120 bar min but the one I got is only running at 5bar that ticks over but won't rev more than 2000 rpm it needs a new pump but im having trouble finding one if there is one out there please contact Me or phone Me on 07905918810 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.