Jump to content

Recommended Posts

Posted
my MFD does not seem to be displaying the outside temperature in place it just shows 2 dashes followed by the deg C sign there seems to be a drop shaped thingamy under the near side mirror... but not sure if it works at all.... how to check how to replace.... well how to take the mirror off....
Posted
my MFD does not seem to be displaying the outside temperature in place it just shows 2 dashes followed by the deg C sign there seems to be a drop shaped thingamy under the near side mirror... but not sure if it works at all.... how to check how to replace.... well how to take the mirror off....

To remove the mirror is as follows

where the door mates up with the dashboard when closed youl see a trangular piece of plastic on the door pull this off. undo the bolts/screw that you can see undo the multiplug and the mirror is off

Posted
To remove the mirror is as follows

where the door mates up with the dashboard when closed youl see a trangular piece of plastic on the door pull this off. undo the bolts/screw that you can see undo the multiplug and the mirror is off

i had a go around in a scrapyard nearby today they dint seem to have any c5 lying around but tried it out with a xsara. i took the mirrored glass off by pulling it and using som levearage behind the glass and then got stuck with the temp thingamy as i could see a couple of wires attached to it is it the same with a c5 and if so could i just clip off the wires and use wire connectors to join it up on th c5 or is there a connector like the 406's have???

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...