Fitting Bluetooth Kit

[DaveHerns]

I've just won a Motorola bluetooth kit on Ebay. I imagine I will fit it under the dash on the nearside Where is a good point to pick up a permanent live and an ignition controlled live ? One off each cigar lighter on the console seems a good idea ? Would you use Scotchlocks on this thin wire or solder on to the existing connectors ?

[DaveHerns]

I think I will use the cigar lighters as they will take the power required with no probs

 

It has an orange wire for audio mute .How do I get the radio out of a Mk2 C5 - I've tried poking rods through the 2 holes in the front panel but no joy. If I get it out is this orange wire a straight conection to the radio wiring ?

Thanks

[fatboyjt]

I think I will use the cigar lighters as they will take the power required with no probs

 

It has an orange wire for audio mute .How do I get the radio out of a Mk2 C5 - I've tried poking rods through the 2 holes in the front panel but no joy. If I get it out is this orange wire a straight conection to the radio wiring ?

Thanks

 

Hi,

 

The radio comes out by removing the plastic surround (goes round the two oval switches at each side of the radio also) you can then remove the two torx screws holding the radio in.

 

You may also be able to take the mute from the traffic master unit which is in the top of the glove box? or im not sure if you have the under seat wiring for a cd unit, but maybe there also?

[DaveHerns]

Those instructions would seem to be for the Mk 1 C5 v, mine's a Mk2 with the Peugeot 407 type radio .Anyone know how this comes out ? I'll have a look on the Peugeot forum ......

[Guest digitalinkjetman]

Those instructions would seem to be for the Mk 1 C5 v, mine's a Mk2 with the Peugeot 407 type radio .Anyone know how this comes out ? I'll have a look on the Peugeot forum ......

 

Try this forum, the people who run it are very helpfull:

 

http://www.siocommunications.co.uk/Forum/i....php?board=43.0

[DaveHerns]

Try this forum, the people who run it are very helpfull:

 

http://www.siocommunications.co.uk/Forum/i....php?board=43.0

Thanks

 

The bluetooth kit was easy to fit with the feeds coming from the 2 cigar lighters - one ignition controlled , one permanently live .The radio apparently comes out with a torx driver (TX 10 ?) inserted through the hole either side of the radio front panel , If it's not a simple as connecting two orange wires together I'm not going to bother with the mute facility