Jump to content

dynamite40

Members
  • Posts

    3
  • Joined

  • Last visited

dynamite40's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. hi all just about to change the front pads on my wifes c3 pad number fdb1542 however these pads have a sloped edge and i am unsure which way up the pads should go many thanks
  2. my wife just got a 2004 c3 very pleased with it had it 14 days bang front spring snapped phoned the garage we bought the car off and told him he said i cant believe this its only done 30000 and has full citroen service history any way he paid for recovery and i told him about the recall for the spring cups and that ours had none fitted even though it is in the recall got the vin numbers that were affected of the vosa website he went over the road to citroen and told them about this guess what your car was not affected he came back and said to me where did you get this info on the recall i told him the vosa website he said leave it with me later on the afternoon he phoned and said i have spoken to the main dealer and they have said they are going to foot the bill so a result if yours breaks just go and see them or phone the main people you may be suprised
  3. hi all came across this bit of info on a site that may be helpful to some of you Peugeot and Citroen BSI (Body Control) units are very prone to failure. Symptoms include no indicators, ignitions lights on with no key, wildly incorrect cluster readings and complete non start. if you are getting any of these symptoms try this rest procedure Failure to follow this procedure could result in incorrect operation of many BSI related items. Put the driver's window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver's window. Switch on the ignition and check system's functionality. Hold lock button on key down for 10 seconds. Remove key open & close door test central locking system. Start the engine and complete the system's check.
×
×
  • Create New...