old lager

thanks dave i have followed your instructions for dismantling pump,i have also registered at citroen service web site but i think there having problems with the sight,after registering i cannot access the site will try again tomorrow. anyway after taking the pump of i discover the pump i got from the scrapper is the wrong one it is a three pipe instead of two even though he insisted it was the right one,will be phoning tomorrow. so i am only a little bit further on can anyone tell me why you can't repair the pump because it looks to me that the gasket is missing on mine or was there never one fitted from new,which seems strange!!the pump itself looks to be in good condition the rubber seal looks to be okay and except for no gasket i can't see any fault so unless there is some dire reason why i will try some liquid gasket and see what happens. let you know what happens. old lager.

does anyone have a diagram of the removal and replacement of the hydraulic suspension pump for a 94 xantia 1.9,it is a two pipe version. i have managed to get one from a scrapper but i think it is a three piper there seems to be another inlet but i dont know wethwe it is just some kind of nut missing. also can anyone suggest an easy way to get to the hex key at the back of the pump,with the suspension down i dont think i can get a jack under. old lager.

dave check how many pipes are attached to the pump,there are two or three if yours is a bog standard xantia 1.9diesel,hope that helps. old lager.

myxantia has started to leak from the pump i have checked all the pipes and there all sound,any ideas on repairing or if i have to replace where to buy a used pump. thanks. old lager.

thanks ivon for your help with the radio i will check out the number plates for a dealer's name but i think this car has had a variety of owners. i will let you know what the outcome is. thanks. old lager.

morning everyone ii am having a problem with the hydraulics on my 94 xantia, it has started leaking at the front underneath the engine. i cannot see where it is coming from,would anyone have a diagram of the pipe work,it seems to be directly under the pump but it could be coming from anywhere. thanks in advance. old lager.

i have had another look at the radio but the only id.is the numbers i quoted,all the other info just tells you it is set up for the uk. looking at other citroens they mainly seem to have blauphunkt and this is the original factory fitted radio,so would it be worth trying the codes for that make!! thanks. old lager.

thanks ivan i will take the radio out after christmas,have a good one. old lager.

i have a 1994 xantia 1.9 i had to disconnect the battery to do some work and forgot about the codes,i bought the car second hand and i did not remember to find out the code,so how do i go about re-coding. any help would be appreciated. old lager.

thanks colin so the little nut dosen't hold the disc on so how do i get it off,is it just a matter of loosening with a hammer or how else can i do it. thanks again. mutzig

can somebody help me i am stuck on changing my rear discs and pads on my xantia 1.9 1994. has anyone got a diagram for rear brake assembly,my biggest problem is how to get the old disc off there is a small nut that seems to be holding the disc on is this a special size because i cant seem to move it with a size 6 spanner. any help gratefully accepted. mutzig