zena ellie

Hi I have a lexian pp2000 version b and need the software to make it version c can anyone help

fitted second hand ecu . bsi. Egnition barrel . transponder and key. But still cannot get car to start any help welcome Fitted to citroen c4 vtr plus 2lt petrol all parts are also from same model

Yes car just turns over petrol being pumped via 12v power supply .. but no spark. Car was turning over on easy start until anti theft fault came on...

Have tested pump is working if I put 12v to it direct.... getting no power from ecu to pump no spark s from coil pack.. Was told it was ecu..BSI fault

car was working Ok until it was broken into end of last month. They used a remote zapper to open the car..much the same as the all in one remote you use to operate your TV .. It scans for frequency then it lights up to show you that it had the frequency then you can press the button to open the door . After it was broken into it started cutting out.when driving...I have had the car for 5 years. I had auto electrician look at car and he had problems getting his unit to communicate with the ecu and said most systems were faulty. When he did get it to communicate. He erased the codes and the car was Ok for a few days then it started cutting out. And now it won't start

Ok have checked all fuses all Ok disconnected full line from pump in tank and turned engine over no fuel coming out of tank...put easy start in engine and it fires up...is there any way to check wiring to fuel pump

Won't start was told by auto electrician that ecu was not working right.. Car just turns over no fuel coming out of pipe.but will fire if I spray easy start in.. If I use master key it says anti theft fault. auto spark said I would need to replace all that I have listed above....I have found a set with everything listed but it is not from a vtr+ its from a vtr so not sure if it will work.

Hi looking for a citroen c4 vtr plus 2lt petrol engine parts Ecu . Keys ignition barrel BSI fuse box. Transponder. As I am going to try changing mine to see if I can get car running again....

Is there a separate ecu for the alarm on a citroen c4 vtr plus 2lt petrol engine. If so can anyone tell me where it is fitted.

Have tried transponder but still not starting.and I have bought a new battery but still nothing is there a separate ecu unit for the alarm off so dose anyone now where it is

The faults started to come up about 2 days after my car was broken into. Using a remote scanner.which searches for your alarm signal when it finds it you can open the door . But it dose not turn alarm ect off it just unlocks the doors.but it cause a fault in the ecu . Have sent bbs two emails to see if they can fix ecu but I have not had a reply

I have orderd a transponder.but I am bidding on a full system .fuse box . BSI Ecu. Locks barrel . key ext.but only the Master key Looking at the plastics I can only see what look like small nuts not screws and I cannot get anything to fit them

Ok that's it going to replace ecu transponder lock etc fuse box any one tell me how to get plastics off strearing wheel so I can replace ignition lock and Transponder

so that means that when I arm/disarm the alarm with the key phob.is not actually working.. lights Flash etc . Doors lock and open but the car will not start..

Hi I have tried what you have put in the post but it did not work... How do I do a BSI RESET... When turning the engine over with fuel line disconnected from injectors no fuel is pumped out..I have also tried all 3 keys the mater key says anty theft activated ..

It's a 2lt petrol.. since the auto spark had a look the car will not start at all the battery is only a few weeks old.but the car now says it's in anty theft mode. Car turns over but will not start...

Hi all i have a 2006 citroen c4 vtr plus 2lt that has stayed throwing up lots of problems with the ecu. To the point where the car will no longer start.had auto electrician check car out and he said the ecu was not working right.. codes were p1621 ecu level 2 module 1,3,5,8,16 and that I would need to replace the ecu so I am looking for a second hand unit with keys and fuse box and locks alarm. but I do not know how to remove fuse box in car or where the alarm is to remove this. Any help welcome..

Thanks for the reply, The garage changed the front brake pads and disks, and ABS comes on when moving. garage checked and only fault code was signs of an emergency stop. they have since cleaned sensor and checked wiring, they said ABS was working fine. and showed no fault codes.

Hi I have recently purchased a 54 plate C3, since having this it has been into the garage twice for a noise on the brakes. Over the bank holiday weekend the ABS light was coming on, I took it back to the garage they put it on the computer and told me no fault was coming up so the cleaned the sensor, the ABS light has come on again today. Does anyone have any ideas what this could be. Thanks