jasrey

Hi I found this on a forum Put the driver's window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver's window. Switch on the ignition and check system's functionality. Hold lock button on key down for 10 seconds. Remove key open & close door test central locking system. Start the engine and complete the system's check. Failure to follow this procedure could result in incorrect operation of many BSI related items. the only bit that confuses me is: Hold lock button on key down for 10 seconds Do you do this while the ignition is on ?. I would have thought that it would not do anything. From experience if you have disconnected the battery the central locking will not work unless you shut the bonnet first, then lock and unlock the car. Any thoughts Thanks

Hi thanks for that, How do I reset the Bsi Regards

Hi Moderator, My engine is a 2ltr Hdi Thanks

Hi I have a Citreon C5 hdi 2002, when I use my wipers they wipe correctly but park half way up the screen. While wiping they go to the correct position on the screen . Has any one got any ideas what may be causing this. I did think it was a service mode but I have tried all options found on the inter to no avail Thanks

Thank you for this quick response. I will take a look at ebay now I know where to start

Hi I was wondering if anyone can help, I have got a Citroen C5 SX 2002 Diesel. Is has a couple of faults coming up on the display, 1 being airbag fault and the other is the common anti pollution fault. I have an idea how to fix these but would like to get a code reader that will work with my model of car. Can anyone suggest one. I have noticed that the cheap eBay and Amazon ones will not read the Diesel cars manufactured before 2004. Any ideas Thanks Jasrey