8carlh

I did check them and got 12 volts on them all. Could there be damage in the fuse box, water etc that could be stopping a signal being sent or something. The garage I use is literally a 5 min drive away. I just need to get the car to him for a complete diagnostics. They won't come to me. So near yet so far. I am now at the laughing stage, crying fully finished now.

Well new starter motor on it today, spare keys and still nothing. The only thing I noticed is that the indicators flash really quickly for a while when I open the cars with the button.

Also my reader sometimes says no codes, and then sometimes P1351 comes up.

Ok a weird one here, absolutely nothing happening on start up. Worked on car and it ran like a dream, as the battery was off a while the car told me it needs charging. Took it off and charged it then absolutely nothing. Bench tested the starter, checked all of the voltages and earths on everything and new battery. I turn the key and everything sounds as it should but on ignition all I get is a clicking coming from the fuse box, the starter does absolutely nothing. I have done the BSI reset and still nothing, it just clears the economy mode for a few minutes. Assuming it's something to do with the immobiliser. Completely at a loss. Does anyone have any ideas? Many thanks

I had to replace both wiper motors to fix the peoblem, parts are expensive from Citroen. Enough said about that. I have got the gearbox loose and the release bearing is completely shot. I have another problem now though, how on earth do you get the gearbox out? I want to check the clutch and flywheel and replace the lot if needed after all of the work involved. There was a lot of debris in the bottom of the box when it came free so I am fearing the worst. Rebuilding my old Austin is far easier than working on this car

Hi, hopefully someone can help me with my problems. I am having a mare at the minute with my car. It is a 2008 C5 2.0 HDI+VTR. First my MOT cost me £500, then my front spring snapped and that was an absolute pain to replace, but it got done. My wipers don't work and the clutch (possibly release bearing) is on it's way out, a job for the future. I have checked all fuses, replaced the drivers wiper motor with a brand new one, had it diagnosed (the people said I needed to replace both motors after investigation) with nothing showing. My stalk activates and deactivates the auto wipers, which I assume means that it's working. BSI reset has been done but still nothing. I do need to replace my battery as it goes into economy mode instantly even after fully charging the battery. I am currently at my whits end with it and need help and ideas as to what it could be. PLEASE anybody.