R1-Mini

Name: Citroen C4 Coupe (2004) Date Added: 09 October 2015 - 09:36 PM Owner: R1-Mini Short Description: 2.0 16v Hdi 6 Speed Lowered on Coilovers, EGR Blank More Mods to follow including Re-Map http://www.citroen-owners-club.co.uk/citroen/uploads/garage_images/image_url-92764-1444422987_thumb.jpgView Vehicle

Another update lol Turbo came to life all on its own and car is pulling like a good 1 now Car is great to drive and even better on fuel than it was before But we still have this p2565 error?? Its had a new turbo actuator sensor and there's no sign of water and the scuttle panel trim is all in place so no water dripping down onto the sensor Anyone have any ideas?? Ive seen a lot of info about how you have to set up the actuator if its removed, but thinking that if for some reason the sensor has a slightly long shaft then it would give a wrong reading then in turn give a wrong voltage ?? Or am i miles from the mark?? Thanx Andy

No you should be fine But would get it Serviced ASAP after that And get the Particle filter additive topped up as well as that can cause even more probs if you Dont

Well here's a New 1 Turbo still not Boosting checked the Actuator and that's holding vacuum and checked the pipes to it and the Solenoid and no leaks and holding vacuum (should i be able to blow through the Solenoid when off) And here's the Best bit although the Turbo is not working i've got no Error Codes or Lights on the Dash lol Please can someone shed some light on this very long tunnel

Cheers for that Paul

There is a Vacuum type pump solenoid somewhere that is attached to the Actuator The wiring to the Sensor on the Actuator is all Good as that Error has no Gone Got to find this Solenoid to be able to try and trace a Vacuum leak, can't follow it back from the Actuator as i can't see or feel it unless i strip the engine down again But Thanx for the Help

So you think i might be the turbo electro valve? a Any idea where it is on the car ? or any Pics Please

Hi Well after about 30 mins of driving all good and then the EML came on and the Depollution Fault Car still running fine but we have no Turbo as its seems to be not spinning up ? and no change at about 2000 rpm when the turbo kicks in It does pull all the way around the rev range but is lacking that turbo pull We have got a error code of: P2565 Turbo Valve Position Copy Signal, Open Circuit; Short Circuit to Positive I'm really losing the Love for this Car now But can see Light at the end of the Tunnel lol Can anyone Help Please

Cheers once again Paul H Thanx for your Help m8 Will post up again once i've taken the Car for a Good Drive

Just a little update Turbo position sensor changed and all codes gone with EML, ESP/ASR Lights out Only thing now is the P2565 Permanent Fault, Turbo Valve Position Copy Signal open circuit; short circuit to positive ?? But will hope someone can shed some light on it and can get rid of the Error All new front Brakes fitted and have to Bleed them tomorrow with the help of Lexia Then should be good for a test drive Oh and we have working Headlight washer also with the change of the Pump so the Car is getting there now after all the Probs we have had

Oh Good 1 less thing to worry about :rolleyes:

Thanx again Paul Ive already ordered a turbo sensor and got it for £50 inc from a m8 of a m8 who works at a turbo rebuild place So just waiting for that then ill fit it and go from there I have done a general look over all the plugs and pipes and all look to be good with no signs of water or splits The swirl plate diaphragm actuator is that what i call the Vacuum pump ?? if yes then thats fine Cheers for the Help again m8

A bit of an update The flow meter was a new bosch 1 i dont like buying cheap parts I ve been taking the sensors of 1 by 1 and re doing the checks with lexia And when i take the turbo actuator position sensor plug off the p2670 error code goes?? So would that mean i need a new 1 and it setting up ? Also in regards to the -50 maf that error goes also when i take the turbo actuator position sensor plug off Cheers for the Help Paul.h :)

Cheers Johndouglas Yes battery is fine at 12.8 volts and then when engine is running goes up to 14.3 And very careful about taking the battery on and off as had a 307 and learned the hard way as the mrs had a the aux belt go on her and she never told me until it ran out of juice and it cut out on her, and that spike the bsi But everything was fine up to the point the EML and ESP/ASR lights come on and we have all these errors

Thanx for the Reply Coastline Taxis Sorry car turns over but wont start And no not had any work done on it Car was running great then we had the EML and the ESP/ASR lights on and this just kept going on and off when it felt like it Some said it could be brake switch and wiring (that never fixed anything) bought new from Citroen with modded wiring loom Then it was said it could be the Fuse Board which is common on these (so people say) same again New Then got a New Battery and then today got a new Crank Speed/Position Sensor Had all the wiring apart and took out of the plastic fuse box just to check for splits or kinks but everything looks fine Put battery on and the car started this done it for 6/7 starts then it would not start and now it just turns over

Hi all I Really need some Big Help Please Starting to Lose my Mind now and so is the Mrs which is Never Good We have a C4 Coupe 2004 2.0 16v Hdi VTS The has a mind of its own, sometimes starts 5 or 6 times after battery has been off then it wont start at all, took battery off still wont start We have the EML and esp/asr lights on Had it on Lexia and gave us some Faults and a lot of People have said it could be the Brake switch and Citroen Cable Mod so went and Bought them Then after a lot of People looking and throwing ideas around we went and got a new Engine Bay Fuse Board (still the same) But after fitting we got some more Errors and so i changed the Crank Position/speed Sensor (and still no good) Here are the other errors we have now Please can someone Help get our car running again Please Errors are U1118,U2001,P1693,P2670,P0337 Thanx All like emoticon

It has got a new 1 on

Cheers Coastline Taxis Had no work done on the car to do with windows or panels Yes done that all that Took ecu out and blow out where the plugs go and had a good look for any water marks or green but nothing even cleaned the pins with electrical contact cleaner and still no good Also had the engine bay fuse box out and did the same with the same results and still found no water or green The only thing that was there is some sort of what looks like an oil??? This is the 2nd time its been there 1st time i gave the fuse box holder and the bottom of the fuse box board and good wipe down so all was free from and water,grease, oil and anything else But when i checked again this time to clean all the plugs there was like some more oil type stuff there again?? Also the 1st thing i did when we bought the car was to check and clean the drain holes so i know there all chear

Hi all Just like to say hi as this is my 1st post We have a Citroen C4 Coupe VTS 2.0 16v Hdi 2004 78000 Its been great since we owned it until i washed the car, that's when we started having probs Since i washed it the EML and the ESP/ASR Lights come on together EML 1st then the ESP/ASR These can be on for a few hours or Days and then the ESP/ASR Light goes out then the EML This can happen at anytime The code i have are P1471, P2563, P2670, U1213 We have fitted a new brake switch and modified wiring loom from Citroen (no difference) Fitted a new Battery (no difference) Blanked the EGR of but has a 6mm hole in it Had a new turbo vacuum Solenoid and a new Turbo Copy Position Sensor But starting to lose love for the car now as i keep getting told its 1 thing after another and nothing fixes it Its got a mind of its own The Only we have not bought at the min is a new Engine Bay Fuse Box as been told it could be that ??? But at Nearly £200 Cant buy that to find out its something else that's causing the Issue Any Help would be Appreciated Andy