Andylink

My van was recalled a few years ago to fit the new style wind down carrier. I have never used it but it’s jammed, any tips to get it to move would be appreciated.

Thank you for your help on this, I am not sure if I have a dpf is it like an extra small box? a seach on 1730V9 comes up with this picture: http://www.iauto.lt/images/cache/GraphicsData/d/be/dbea125c43fa29b1aaadc94776484dea-800x600.15003750938.jpg Which does look like the correct one. But I dont know if I will be able to find one anywhere

Thanks you for the information, I followed your advice and registered on the Citroen service parts web site. I entered my vin number and the exhaust parts displays a picture that is not the same as my exhaust back box, maybe its showing a LHD one? Here is my vin number if any one can help: VF7YCDMFC11299499 Both in and out pipes on mine enter at one end of the box, in fact it looks like the one on ebay on the link in the post above, except the clamp is a sleve type, and not a standard clamp.

Im having a problem finding a the rear silencer exhaust box for my van. Anyone know if there are any available anywhere? even Citroen are having trouble supplying one. It the iveco 160 engine. Wondered if its the same part as the Fiat version ? Thanks Andy

Brilliant, thanks again.

Thanks for the advice, I will check what you suggest, thanks again

The clutch is not disengaging fully when the pedal is pressed fully to the floor. If you engage 1st gear with the engine off foot fully down on clutch and start the engine you can feel the clutch is engaged slightly and the van will creep forward with the clitch pedal fullt down.

Wouldn't a worn out clutch slip not drag ? Also seems to be intermittent, its been ok last couple of journeys, could it be the hydrolics ?

Thanks for the reply, the gears engage fine with the engine off. If I put it in 1st gear with the engine off, foot on clutch and start up, you can feel the clutch drag, like its not releasing all the way, the pedal feels ok, and pumping the clutch doesn't make any difference.

My clutch suddenly started dragging making it difficult to get into gears. It fixed itself for a while but the problem has now returned. Anyone know what could be causing this ? Gearbox clutch and dual mass flywheel where all replaced 18 months ago. Thanks in advance