andyhugill

Any guidance please, 2008 C5 X7, 2.0 HDI Estate. Wipers have been mis behaving for a while. Firstly stuck on intermediate on whichever setting then they folded over each other and left stopped working with right jerking up about 4" then back down again. I've read that it's probably the ECU in the slave, left side. I have removed the motors and panel to get to the ecu and put the multi meter across each terminal pin and the connection to the PCB and there seemed to be lack on continuity. Tried to remove the PCB but to no avail, rechecked continuity and it seemed okay after messing about but when i refitted the motors they still don't work. Are new motors required as the few there are about seem expensive and i may need two. Or is it worth trying to get them looked at by an auto electrician. Does anybody have any experience with this.....PLease Andy

Thanks, that would seem to be the problem. I took this off to replace the suspension arm and was a pig to get back on again with limited access i think i must have dislodged something or the link has come off. I'll have another look later. Thanks.....Andrew

I have just replaced my 53 citroen c5 with a mk3 58 c5. I've just changed the front lower wishbones due to worn bushes and now the front suspension is stuck at it's lowest setting while the rear is working fine. Any ideas please as it's stuck on the drive at the moment since the front clearance will not let me off. Thanks in advance