Keithw

Hi again After examination, I found that there is wiring in the doors for adjusting and heated and folding mirrors. But the 2 wires needed for the folding stop at the plug which is in the rubber door gromit. So did not go any further. I extended the 2 cables for each door and put them on a switch hidden in the cubby hole under the steering wheel. Work perfect.

Hi 2006 model, the wife has 2009 exclusive, with folding mirrors that work. Checked with lexia on both cars and all boxes ticked the same. Will examin both passenger fuse boards tomorrow to see if I can find the problem. It must be fuse or relay missing. Will report back ......

Hi And thanks. Have checked all the wires go to the right places as in Haynes manual. Just looked a bit further in lexia, and I think there maybe a relay or two that are probably missing as the car didn't come with folding mirrors. Might have to take the passenger fuse board apart and have a good look around. I thought there would have been someone on here that has retro fitted these... I did the cruise control retro and worked fine. Thanks Keith

Hi Fitted fold back mirrors, switch for fold back mirrors and activated them via lexia but the only bit that's not working is fold back. Adjusters are ok, and so is heater function. ??

Hi New member here, hello everyone. Just retro fitted folding mirrors to my c3 vtr. Everything works, heated mirror, mirror adjust but can't get the fold back bit sorted. Anyone done this, and anyone got any ideas to help.. Thank you Keith