Driver Side Electric Window Cable Renewal

[bordercollie]

I have a Citroen Xantia, "W" Reg'd (2000), 1761cc Saloon, running on Petrol/lpg.

 

Recently I leaned on the half-open driver's side window glass when I was outside the car, and this must have broken the cable that pulls the window open and closed, or the cable has come away from it's runners.

 

The window's electric motor still works when the 'up' and 'down' switches are pressed, but I have had to wedge the window open in case it falls into the door well.

 

(1) How do I remove the drivers door panel, to gain access to the inside? I can only find a couple of 'star' screw fittings but are there more, and where are they?

 

(2) Has anyone got a diagram or instructions to refit the window glass back onto the operating cable, as I think it may have wrapped itself around the main motor pulley wheel.

 

(3) If the window operating cable IS snapped, where can I get one cheap, and roughly how much do they cost?

 

Any advice or help would be appreciated, thanks.