Jump to content

Recommended Posts

Posted

Hi, I need to fit a new wing mirror on my despatch 2015 but don't know how to get the door card off to plug it in. Does anyone know how to get them off?

 

Thanks in advance

Posted

Welcome to the forum.

 

This is the procedure from a couple of years ago but it may still apply:

 

3. Stripping
Open the door.
3.1. Electric window switch assembly
Unclip the electric window control switch lifting the front edge first.
Partially detach the electric window control.
Disconnect the connector then remove the switch.
 
3.2. Door trim pad
 
Unclip and remove the inside handle trim .
Unclip and remove the interior window corner trim at the front lower edge.
Unclip and remove the door grab handle pad trim .and then the 2 bolts now revealed.
Remove the 3 bolts down the rear edge and bottom of the door card and then unclip it down the side and bottom and remove it - some clips may break.
 

The door mirror is held by 3 bolts and a clip.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...