jon wood Posted August 8, 2004 Posted August 8, 2004 Hi Has anyone fitted a towsure towbar themselves to Multispace, if so what was required ( Cuts/Drilling ) and any problem you encounted, Our local Towsure centre has a 3 week waiting list for towbar fitting so it would be quicker to fit it myself. Thanks Jon Quote
Albert Posted October 25, 2004 Posted October 25, 2004 Bet you've had a bar fitted now but here goes anyway........ I fitted a Witter bar on my Mk1 Bling, in about 3 hours. I had to trim a small bit of the bumper but no drilling required as all the holes are in the chassis from factory. The electrics are easy enough as you can either by a fitting kit from Citroen which you plug in, or crack on with the Scotchlocs. Being a tight git, I used Scotchlocs. Quote
jon wood Posted October 25, 2004 Author Posted October 25, 2004 Thanks Albert Fitted a Eurobar £69 and a 7 Way Multiplex Relay & Fitting Kit - £19.95 from Towbar Direct The towbar comes in 4 parts that bolt together into factory drilled holes, took about hour for the towbar ( no bumper cuts ), electrics was a bit of a pain as i had to take a live feed direct from the battery for the relay. I ran the wire under ther car and attached it to brake lines. Fitted the relay by the N/S rear cluster but still had to run 2 wires from the O/S for the indicator and fog light so this took about 3 hours. Jon Quote
Brilec Posted October 30, 2004 Posted October 30, 2004 Do a search on Ebay for citroen towbar. There are some there for £81 including wiring harness from Towequipe. Very fast service, and aftersales advice. Quote
Terry1100 Posted April 4, 2005 Posted April 4, 2005 Towequipe seem very helpfull and prompt in responding to e-mails. Does the multiplex wiring on the '02 on models pose any problems with towbar wiring ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.