Jump to content

Recommended Posts

Posted

Very easy to fit.

 

Remove the plastic interior off the tailgate by simply spinning it upwards for the first piece this should get it out non of the clips snapping. Then you need a T15 bit i think it is to undo 2 screws that hold the side panels on.

 

Then just unplug the rear window as it gives a bit more clearance to get the last piece off. Which is the hardest one to get off if you have big fingers. But just have to pull it.

 

You can then see 5 bolts which hold the old spoiler on. Undo them remove spoiler and clean the window. since the new spoiler will be attaching to the window with some double sided tape on the sides.

 

I would personally get rid of the tape though and get some sikaflex on there or something similar. As the tape did not work too well for me.

 

Then replace the struts on the tailgate. Need a flathead screw driver for that to pull the clips off then the strut just pulls off. replace them. Then fit the new spoiler. And tighten up all the bolts and replace the interior trim.

 

Should take no longer than an hour. Took me 30 minutes to take it off and put the old one back on last time when someone ripped my VTS spoiler off.

Posted

Agreed - very easy to fit - no longer than 30 minutes..

 

I'd just been careful when removing the plastic to get at the bolts - the clips are fairly fragile..I managed to break one of then!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...