Guest richard Posted October 15, 2007 Posted October 15, 2007 I am wanting to replace the front speakers in my C2, any one know how to taake them out ? Quote
wozza Posted October 15, 2007 Posted October 15, 2007 Just have a look around the panel for screws and remove them and any other loose trim then pull it away. No idea exactly how to do it in a C2 as I have never taken one to bits. But bit of looking around should reveal the answer. They are normally only held in by 4 or 5 screws and lots of clips. Quote
Dalecardiffman Posted December 30, 2007 Posted December 30, 2007 Just have a look around the panel for screws and remove them and any other loose trim then pull it away. No idea exactly how to do it in a C2 as I have never taken one to bits. But bit of looking around should reveal the answer. They are normally only held in by 4 or 5 screws and lots of clips. to replace the front door speakers you will need to slide a flat srew driver or any other flat object into the speaker surround and just give a little pull and the clips will release this is the easy part. Next you will need to drill out the rivets and disconect the speakers. Once the new speakers are in you'll need to gey a few rivets and rivet the speakers back in Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.