thebug Posted July 9, 2008 Posted July 9, 2008 when I start my car the suspension is not raising to the normal position at the back only, the front is ok but it will you to the maximum height it works fine any ideas Quote
Guest Colin Hunter Posted July 10, 2008 Posted July 10, 2008 It sounds like the small plastic link rod which goes from the anti roll bar to the height corrector has dropped off. It's only pennies for a new one but the balls which it clips onto become worn over time and it won't stay on. A well tried "fix" for this problem is to make a small "L" shaped peice of steel to support the link under the height corrector end and, with the link in place, lightly tack weld the support to the height corrector arm. A couple of small tacks are all that is needed, any more could cause excess heat to damage the height corrector. Cheers. Hope this helps. ;) Quote
thebug Posted July 19, 2008 Author Posted July 19, 2008 It sounds like the small plastic link rod which goes from the anti roll bar to the height corrector has dropped off. It's only pennies for a new one but the balls which it clips onto become worn over time and it won't stay on. A well tried "fix" for this problem is to make a small "L" shaped peice of steel to support the link under the height corrector end and, with the link in place, lightly tack weld the support to the height corrector arm. A couple of small tacks are all that is needed, any more could cause excess heat to damage the height corrector. Cheers. Hope this helps. :D Thanks very much we were spot on with this Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.