Brake Calipers

[Guest Bry]

Any one out there know the Star bolt size please, as i need to replace the pads on my 2002ex thanks :unsure:

[iannez]

if its the front all and its just the pads you will need a 13mm spanner and a piston wind back tool. if its the rears you need 2x 8mm spanners and a screwdriver to push back the pistons. torx bit is only needed if changing front discs. its a t55 if you need to do this.

[Guest Bry]

if its the front all and its just the pads you will need a 13mm spanner and a piston wind back tool. if its the rears you need 2x 8mm spanners and a screwdriver to push back the pistons. torx bit is only needed if changing front discs. its a t55 if you need to do this.

Thanks for the info much appreciated