Playfairltd

I am not sure if you have fixed the problem yet, but if not , they did use to play up when only putting £5 in here £10 in there.The gauge is worked out on a percentage so it used to mess the calculations up. It was a easy fix though, as you could reprogram the percentages. Hope this helps Shaun

You can do a manual particulate filter regeneration by driving on the motor way. You need to check to make sure you have enough eloys fluid to make sure there is enough in it. Hope this helps

The turbos on 1.6 hdi are known for failure, so it is very advisable to allow the engine to run down and also to keep on top of the maintenance. Hope this helps

The Citroen 2.0 hdi engines are very common for the rubber in the bottom pulley being worn. If the belt had come off whilst driving this can cause the bottom pulley to fail. I am not sure as to why this is, Citroen sent out a memo about not to run them without the belts on. To change the bottom pulley you are meant to pin the flywheel before removing the pulley bolt. Hope this helps.