Guest ala Posted April 15, 2011 Posted April 15, 2011 hi I have C5 2003 vtr hdi Mileage 160000 .When I turn the ignition on and hear the sound from the fuel pump it starts.but some time when I do not hear sound(fuel priming)it does not start.Some time it starts after trying few times.some time it takes much longer.One thing I have noticed is that it only starts when I hear the sound from fuel pump(fuel priming) and warm or cold has no efect.could any one tell me which part is faulty.I would be very gratefull. Quote
coastline taxis Posted April 15, 2011 Posted April 15, 2011 +theres a few things you need to check 1st.if you feel competent enough ill list them for you. if you not that way inclined then take it toi the dealers so it can be checked Quote
Guest ala Posted April 15, 2011 Posted April 15, 2011 thank you for your reply I took it to the dealer but he said can't diagnose as the car was starting that time.Once whenit was not starting I called the mechanic when he came to check it it started on first atempt.I will be gratefullif you list the things which I need to check. In a month time I faced starting problem nearly 20 times and it stoped while driving 2 times.Its diesel car . thank you Quote
Guest qman3428 Posted April 16, 2011 Posted April 16, 2011 sounds like an air leak in the fuel system. It lets the fuel run back into the tank so it wont start. Next time it does it dont keep on with the key, try priming the system with the hand pump, and then see if it starts. If it does I would definately be looking for an air leak. Quote
coastline taxis Posted April 16, 2011 Posted April 16, 2011 if your not hearing the pump prime then it wont start as it means that the low pressure pump (in the tank) isnt supplying fuel to the high pressure pump (on the enginge). this could be a wiring or bmi (relay on the end of the engine fuse box) but the most common is the in tank pump and 160k on the car it probally due. next time you dont hear the pump priming lift up the back seat and check that youve got power going to the pump using a multimeter. its not live all the time youl only get a reading for a few seconds when you 1st put the ignition on. test it and get back to usbest regardssteve Quote
Guest ala Posted April 17, 2011 Posted April 17, 2011 if your not hearing the pump prime then it wont start as it means that the low pressure pump (in the tank) isnt supplying fuel to the high pressure pump (on the enginge). this could be a wiring or bmi (relay on the end of the engine fuse box) but the most common is the in tank pump and 160k on the car it probally due. next time you dont hear the pump priming lift up the back seat and check that youve got power going to the pump using a multimeter. its not live all the time youl only get a reading for a few seconds when you 1st put the ignition on. test it and get back to usbest regardssteve HiThere is a grey (female)plug on top of fuse box under the bonet .pin number 11 was looking burnt/rusty I have cleaned it, now I can hear thepump prime and car is starting now.I will go to the dealer and buy new plug if it is available.?thank you for your repliesbest regardsala Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.