Jump to content

Recommended Posts

Posted
Hi I just got a 2002 1.4 lx c3 on checking the oil I found that the end of the dipstick is missing I am told this is a common problem is there a replacement you can get with out the plastic end if not how long do they normally last before breaking .
Posted

the plastic end breaks because users pull them out at an angle and they become brittle over time.........they dont make one with a metal end.

 

As far as replacing it goes......the old bit will probaby fall into the sump, if it does it wont cause any dameage or go anywhere so dont get stressed about it. If it gets stuck in the dipstick tube, it ussually means the new dipstick wont push all the way in.....if thats the case sometimes trimming upto a centimetre of the tip of the new one can overcome the problem withought resorting to spending loads of money at your friendly garage.

  • 2 years later...
Posted

Hi, we have just got a 2002 1.4 C3 SX and that has the same problem, any chance someone could take a quick photo of a good dipstick end, measure the dipstick (overall and distance from the end to the low level and high level marks) and post the results along with the pic on here please.

 

That way I can just make a new end and braze it on. No more plastic bits!

 

Many thanks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...