Resetting The Service Indicator

[junior19]

How do I reset the service indicator on my Relay? It is 2006 2.2hdi Relay. Any help appreciated.

[Johndouglas]

I can't say for sure about the Relay but most Citroens reset by pressing the little knob close to the speedo and whilst holding it in, switch on the ignition and hold till it counts down.

[junior19]

I have tried that but no luck, it doesn't see to count down. Thanks for your reply.

[Johndouglas]

Did you turn the key just to the first position?

[junior19]

I pressed the reset button and turned on the ignition til lights on dash came on. Do you think I did wrong way?

[Johndouglas]

No! That sounds correct. Any other button there abouts?

[junior19]

Got it sorted now a mate with a machine reset it for me.

[Neil54]

Found on the web. Not tried it yet.

 

With the ignition off, hold the trip meter (the '000.0' button) in. Turn the ignition into the electric position. You will see a countdown go from 10 down to 0. When the counter hits zero, release the button. You then get a ==0== message. Now turn the engine on. That's it.

[Johndouglas]

Found on the web. Not tried it yet.

 

With the ignition off, hold the trip meter (the '000.0' button) in. Turn the ignition into the electric position. You will see a countdown go from 10 down to 0. When the counter hits zero, release the button. You then get a ==0== message. Now turn the engine on. That's it.

Apparently that doesn't work on the OP's vehicle. I suggested that in the 2nd post.

[heraldsteve]

You have to ensure the mileage displayed is the full mileage before you start the reset sequence, if it's just displaying the trip mileage then the sequence fails to reset the service light.