steve_c47 Posted February 18, 2016 Posted February 18, 2016 Hi Does anyone know if there is an ecu for the suspension & if there is where is it fitted. The problem is the suspension seems to do what it wants & also there is no display in the centre of the dash that normally says if the ride height is righ, low or high. Thanks. Quote
coastline taxis Posted February 19, 2016 Posted February 19, 2016 USE AXLE STANDS its on the side of the suspension pump itself where the multi plug goes into. If you dont have a multifunction display to show height setting then youl have a display on the lower right of the dashboard showing the height settings. The most common cause of what your describing is a seized ride height adjuster. there connected to the anti roll bars front and rear. prize the short link rod off and grease it all and push back on but remember to USE AXLE STANDS Quote
steve_c47 Posted February 19, 2016 Author Posted February 19, 2016 Brill thank you for your help. I work with Bus Air suspension every day so know what can happen with active suspensions.👠Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.