Will My C3 Autochanger Fit In A C4?

[MikeRotherham]

I'm about to part ex my C3 Stop Start for a C4 VTR+

 

I had a Citroen 5 CD autochanger fitted when I bought the C3. I'd like to fit it into the armrest of the C4.

 

What parts will I need to pay for to fit it in the C4?

 

Is it just a case of removing a DIN radio sized moulding from the arm rest as in the C3?

 

Do I need any additional wiring?

 

Any advice would be appreciated.

 

Thanks

Mike.

[kfk]

You dont say how old the C3 was.....if its older than 55 plate its a definite no, if its on a 55 plate maybe a yes, newer than 55 plate it should fit (but dont hold me responsible).

 

Basically, C4 has multiplexed wiring that conforms to a standard we recognise as CAN-CAN.

 

C3 on the other hand was originally developed with a system VAN-CAN and around 55 plate switched to CAN-CAN......as far as the stop start is concerned i cant remember when it was introduced and may only have been produced with CAN-CAN.....if you have the chassis number for your C3 PM it to me and i'll see what it tells me.

 

Alternatively Iannez will probably be along shortly.

 

An update:

 

Just had a look on both C4 & C3 parts lists......there are around 9 different part numbers in total to choose from, i woud recommend against trying to fit the C3 unit into the C4, there is obviously a reason why they have all these choices and the saving to be made by 'seeing if it will work' will be far less than the cost of consequential damage if it doesnt.