jockey Posted June 10, 2007 Posted June 10, 2007 hey guys got a little question for yous. i am going to change the front discs & pads on my xantia hdi is it straight forword?? is there anything i have to do with the abs when doing this?? any help on this will be great. Quote
DickieG Posted June 15, 2007 Posted June 15, 2007 As the handbrake is also on the front calipers you'll need to wind back the piston into the caliper otherwise you'll damage the caliper. This can either be done with the correct tool or a square shafted screwdriver for instance. Depending upon the model Xantia you have you may need a size 55 Torx bit to undo the caliper retaining bolt, also unclip then pull out the handbrake cables to avoid damaging them as you swing the caliper upwards. ABS has no influence on the job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.