Jump to content

Recommended Posts

Guest bartbass
Posted
i've got a '94 xantia 1.9td vsx nd it wnt start.engine turns fine but no fuel !! tried priming but the bulb doesnt hold the pressure.any ideas what i could do?!please reply asap!!!!!
Posted

Does the car start at all just after getting pressure on the priming bulb?

 

After a short period pressure normally falls via the leak off pipes.

 

Have you checked that the glowplugs are working correctly?

 

If you can give further details of work undertaken then I can narrow down the areas to look.

Guest bartbass
Posted
yeah it turns over k but wnt start at all even after bein primed.it feels like when u run out of fuel but i got 1/4 tank!?checked fuses.nd battery no joy though.maybe pump itself?just cranks over doesnt even try to kick in nd get smoke out exhaust?! was runnin fine a week ago never hd ne troubles startin.
Posted

Take a look at the fuel solonoid cut off valve located on the pump. Is the wire still connected/is it receiving a feed? If it is remove it then pull out the plunger, refit the valve without the plunger and see if the engine starts. If it does you'll need to stall the car to stop it but at least you will have diagnosed the fault .

 

Have you checked that the timing belt hasn't slipped/snapped?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...