V6 Air Filter

[rtap65]

Just acquired a '98 Xantia 3.0i V6. Want to change the air filter among other things. Trouble is, the one sold by GSF is far too big - it's about 50% too long. Also checked the K&N website, and the one they show (same part no. as listed for most other Xantias) is also far too long - looks the same size as the one sold by GSF. Any help appreciated.

[Ronin]

I've always found that if in doubt, take the original airfilter to a local motor factor shop, A1 motorstores are usually good.

They can match it up there and then for you with the dimensions required....I know in fram filters catalogue you can look in the back for the three measurements and it will give you the correct filter number then what it's usually fitted to.

Another way to make sure is there is usually a part number stamped inside the airbox itself, take a note of that to make it easier.

Its unusual to have a different airbox fitted, some reasons for this are performance related.

I Dont know if its the same with xantia filters but I know Alfa 156 filters if you change the airbox from a 1.6 ts to a 2.0

ts type, you get 8 bhp, actually more than a k&n would give you ! My brother had this problem when buying a filter for his 1.8 ts .......Not saying this why it wont match but its a possible reason.

 

Let us know how you get on m8

[kfk]

Of course , you could just pop down to your local Citroen dealer with the chassis number for your vehicle and get the correct one........for the amount of faffing about tryin to find one that fits i cant believe it will be that expensive!

[rtap65]

I'm now embarrassed. I was fooled by the external shape of the housing - at a glance it looked as though it couldn't accomodate a filter of that size. Closer inspection revealed I was wrong. Sorry to waste your time.

[rtap65]

Have now fitted a standard filter, having changed my mind about forking out for a K&N. Seems the latter doesn't filter as well as is claimed. See: http://www.bobistheoilguy.com/airfilter/airtest1.htm