Guest blue2008 Posted April 2, 2008 Posted April 2, 2008 :angry: Firstly hello everyone now Help !!!! I have a Y reg 1.8 petrol estate (68000 miles ) c5 that is running fine but on re starting with a warm engine or on a long run I am getting a stop warning and a red ((!)) on the dash the car is driving well and is not affected in any way but I am worried and would like to get it sorted as soon as poss so any advise would be recieved with thanks :( Quote
Randombloke Posted April 2, 2008 Posted April 2, 2008 :angry: Firstly hello everyone now Help !!!! I have a Y reg 1.8 petrol estate (68000 miles ) c5 that is running fine but on re starting with a warm engine or on a long run I am getting a stop warning and a red ((!)) on the dash the car is driving well and is not affected in any way Brake lining wear warning? Are you getting anything on the one line display? Low hydraulic fluid? Check the handbrake is 100% down and not coming up slightly, and is also contacting the switch to turn the warning on the dash off. Without seeing your car I'm guessing in the dark. So: 1. Brake pad wear or loose wire to pads.2. Hydraulic level - check under bonnet. Search elsewhere on this forum for procedure to check level.3. Hand brake warning light switch iffy - check under handle. HTH. Quote
Guest blue2008 Posted April 2, 2008 Posted April 2, 2008 Brake lining wear warning? Are you getting anything on the one line display? Low hydraulic fluid? Check the handbrake is 100% down and not coming up slightly, and is also contacting the switch to turn the warning on the dash off. Without seeing your car I'm guessing in the dark. So: 1. Brake pad wear or loose wire to pads.2. Hydraulic level - check under bonnet. Search elsewhere on this forum for procedure to check level.3. Hand brake warning light switch iffy - check under handle. HTH.Thanks will check the brake pads and the hand brake switch have already checked the hydraulic fluid seems fine :angry: Quote
Guest vin Posted November 1, 2008 Posted November 1, 2008 Thanks will check the brake pads and the hand brake switch have already checked the hydraulic fluid seems fine :) since you have checked all that try checking the brake lights and see if they are working. i had a similar prob that came up as soon as i changed a jammed hand brake cable. but just dont worry it should sort itself out on its own.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.