Jump to content

Recommended Posts

Posted

Hi

I'm having a bit of trouble replacing the off Side drop Link

Their appears to be a Recess in the Bolt the Nut goes over which I think takes a Hex Key but I'm not sure what size. Or is it a star Key.

Any help would be most welcome

Thanks

Ian.H

Posted
its an Allan key but doubt you will be able to use it due to rusting and much easier to grind the thing off after all your fitting a new one so your not going to do and damage, I cut the bolt off and it just pops out, the new one has the same Allen key hole so ensure you have one at hand because you will need it to tighten the bolt up
Posted
its an Allan key but doubt you will be able to use it due to rusting and much easier to grind the thing off after all your fitting a new one so your not going to do and damage, I cut the bolt off and it just pops out, the new one has the same Allen key hole so ensure you have one at hand because you will need it to tighten the bolt up

Hi

Thanks for the Info

thought it might be an Allen Key but theirs so much Rust I can hardly see the Bolt.

Anyway I've buggered it up. Got the Bolt almost of and the Bit I was using to stop the bolt turning has rounded off.

So I'll have to cut it off.

All this just to change the Top Mount Bearing :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...