Keypad Instruction

[ben2802]

How de do!!!

Was wondering if anybody has any info' on changing the immobiliser code on my 96 P reg xantia petrol. Nothing wrong with the one that i have but buttons are worn and a bit easy to guess. I got the car off ebay and didn't get any manuals with it,

 

Also my heater doesn't work properly, there is plenty of heat there but it's not getting on the screen when i've got it on demister and anything less than full chat it's a bit like a mouse coughing is there anything i could do that is relitivly cheap and quick as when there is a slight drizzle the steams up really quick and if i go round a right hand bend (car leans left) it blows cold.

 

Thanks to anybody who can help.

 

I've been looking all afternoon to help me solve countless issues with the car and these are the last 2

[techbod]

enter the code then press C now enter the new code and press S, factory code is 1111,

 

it might be air in the system run engine till fan cuts in then put the heater to full heat then bleed the system

[ben2802]

enter the code then press C now enter the new code and press S, factory code is 1111,

 

it might be air in the system run engine till fan cuts in then put the heater to full heat then bleed the system

 

 

Thank you very much, will try it later then bleed system on the weekend, will let you know if this works. Cheers.

[ben2802]

Thank you very much, will try it later then bleed system on the weekend, will let you know if this works. Cheers.

 

I tried to change the code as you said but it didn't work, when I pressed the s button it beeped and the light went green and could start the car, came back 1hr later and had to put the old code back in to start it, is there any way it can be done another way, if not, not to worry.

thanks again

[techbod]

Turn on ignition (don't start engine)

Enter current code (red light goes green)

Press C button once

Enter in new 4 digit code

Press C button again once

New code is now entered and confirmed by 4 beeps

Start engine