Guest PENELOPE PITTSTOP Posted October 31, 2008 Posted October 31, 2008 Hi to everyone on here, wondered if anyone could give me some advice on how to refit my arch moulding (front) on my VTR after some burk smashed it off :) Can i get the clips from M/D any tips to re-attach ? Thanks in advance PP (not a girl racer <_< ) Quote
Johndouglas Posted November 1, 2008 Posted November 1, 2008 Probably your wheel arch trims are held the same way as the door protection strips are. Plastic pegs clip into the trim, then push into holes in the door or wheel arch. Unfortunately over time the plastic plugs harden and easily break so new ones are needed. A dealer will have them. However I replaced my door trim using silicone sealer squirted behind the trim so that it sqeezed into the holes in the body. It's stayed fixed for a long time. Quote
Guest PENELOPE PITTSTOP Posted November 2, 2008 Posted November 2, 2008 Probably your wheel arch trims are held the same way as the door protection strips are. Plastic pegs clip into the trim, then push into holes in the door or wheel arch. Unfortunately over time the plastic plugs harden and easily break so new ones are needed. A dealer will have them. However I replaced my door trim using silicone sealer squirted behind the trim so that it sqeezed into the holes in the body. It's stayed fixed for a long time. Thanks John I'll try that ! :rolleyes: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.