dburton1209 Posted March 10, 2009 Posted March 10, 2009 hi i have a 2000yr 20hdi with a broken drivers side fog light have got a replacement of ebay,however haynes manual dosnt include 20hdi and the foglighs they show are pre facelift,been on haynes site and this is the only manual they do. so am i rite in thinking its front bumper removal time????.if so how do i remove it so far headlights out and under tray removed, pls help. Quote
techbod Posted March 12, 2009 Posted March 12, 2009 01 7401 L7 01 FRONT BUMPER- W/O HEADLAMP WIPERTO BE PAINTED 7401 L8 01 - HEADLAMP WASHWIPETO BE PAINTED 02 7452 E7 01 BMPR RUBBR BOOTCENTFZL - HURRICANE GREY- TWO-TONE BUMPER 7452 E8 01 CENT- BUMPER BODY COLORTO BE PAINTED 03 7452 E9 01 BMPR RUBBR BOOTLEFTFZL - HURRICANE GREY- TWO-TONE BUMPER 7452 F0 01 LEFT- BUMPER BODY COLORTO BE PAINTED 04 7452 F1 01 BMPR RUBBR BOOTRIGHTFZL - HURRICANE GREY- TWO-TONE BUMPER 7452 F2 01 RIGHT- BUMPER BODY COLORTO BE PAINTED 05 7414 N2 01 RECESS DOORTO BE PAINTED 06 7414 N3 01 PLUGS SET- NO FRONT FOG LIGHTSTO BE PAINTED 07 7429 73 01 BUMPER PLUG- CLOSED GRILLE + LOWER STRIP + SIDE BLANKS 08 7452 F3 01 BUMPER MOULDING- W/O HEADLAMP WIPER 7452 F4 01 - HEADLAMP WASHWIPE 09 96 137 482 02 FIXING SPACER 10 7908 89 02 BONNET BUFFER 11 7429 79 01 BUMPER PLUG- (S) 70 6922 76 02 SELF-TAP SCREWSDIAM 8X125-30 71 6924 C7RP 6924 K1 0201 SCREW RLXDIAM 4,2 - 16 72 6922 C7 05 SELF-TAP SCREWSDIAM 6X100-30 73 6992 G2 02 RETAINING CLIPDIAM 4,2 http://i469.photobucket.com/albums/rr53/techbod/v617501a.jpg http://i469.photobucket.com/albums/rr53/techbod/v5410500.jpg Quote
Guest Colin Hunter Posted March 13, 2009 Posted March 13, 2009 All these techy drawings and diagrams are all very well, but they can't tell Joe Soap how to approach a job on a DIY basis. You need to TELL people what they have to do. Not everyone is a mechanic or an engineer and can interpret a drawing. If you KNOW an easy way to change the foglamp WITHOUT removing the bumper, AND without main dealer facilities then TELL us! Anyone can post drawings cribbed from the Citroen site without any explanation!!!!!! I await an explanation in due course!!!!!!!!!!! Cheers :ph34r: Quote
techbod Posted March 13, 2009 Posted March 13, 2009 roll of thumb here is observation and the tech drawings show where all the bolts are and show the fog light and where the locking/adjusting locations are but to simply do the job you have to raise the car to full height remove any plastic cover blocking the view of the fog light and see where the bulb goes in,the newer cars have to remove the bumper but this one is not that advanced so bulb replacement should be able to be done with bumper in situ and from under the car Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.