Programming New Keyfob With Diagbox.

[frogeye1000]

could anyone tell me the proceedure for programming a new key to the car using diagbox or lexia.

 

thanks

richard

[paul.h]

This is for a mark 1 C3:

 

1. Remarks

When adding or replacing a vehicle key, it is necessary to perform the following operations :

• Key programming procedure
• Synchronisation of HF PLIP remote controls

N.B. : The vehicle keys are allocated to a single BSI.

CAUTION : Initialising a new key will require all the keys to be initialised.

2. Diagnostic tools

"LEXIA 4171-T" station.

"PROXIA 4165-T" station.

3. Registering the keys

3.1. Initialisation procedure using the "LEXIA" diagnostic tool

Make the following selections in the diagnostic tool :

• "DIAGNOSIS"
• Select the vehicle
• "GLOBAL TEST"
• "BSI ECU"
• "INITIALISATION"
• "KEY INITIALISATION"

Follow the instructions given in the diagnostic tool.

3.2. Initialisation procedure using the " PROXIA" diagnostic tool

Make the following selections in the diagnostic tool :

• "DIAGNOSIS"
• Select the vehicle
• "BSI"
• "LOGO F5"
• "INITIALISATION"
• "INITIALISATION OF THE KEYS"

Follow the instructions given in the diagnostic tool.

N.B. : The "PARAMETER MEASURES" menu can be used to check the number of keys initialised . The number of keys initialised indicates the total number of vehicle keys. The number of HF PLIPS initialised indicates the number of HF keys initialised.

4. Synchronisation of HF PLIP remote controls

N.B. : When replacing the batteries of an HF PLIP remote control, it is necessary to resynchronise the remote control.

Perform the following operations :

• Put the HF key to be synchronised in position "ignition +"
• Within the next 10 seconds, press one of the HF key buttons
• Release the HF key button

The ignition key HF PLIP is synchronised.

N.B. : Perform these operations for the other keys equipped with HF remote control.

Carry out a locking / unlocking test of the vehicle’s doors and tailgate.

N.B. : If the locking / unlocking test of the doors and tailgate is not correct, restart the synchronisations of all the ignition keys equipped with HF PLIPS.

[frogeye1000]

thanks for that

 

richard.