Help Needed Citroen C4 Undertray

[GZ100]

Hi

 

I am looking for help on fitting an undertray for a citroen c4 Cachet.

 

Any direction as to videos I could view or instruction manuals for materials required would be much appreciated.

 

I bought the undertray from mm experrt(Image attached) online and whilst removing the old one I noticed that the fixings were different.

 

This is a DIY job I took upon myself to carry out as I have already carried out a few other jobs on my car.

 

Bar that car is running 100%, I have been driving fords for the 10 years I am driving and I cannot see myself going back.

 

 

 

 

 

 

Any help forwarded would be much appreciated.

 

Thanks

 

[paul.h]

I think this may be the link to the MM Expert undertray on ebay http://www.ebay.co.uk/itm/Citroen-C4-Under-Engine-Bumper-Cover-Undertray-/261327382108

 

Having removed the old one I would suspect you may be better placed than most on how to fit it and whether the old fixings can be used with the new undertray. To help, you can see the Citroen parts diagrams as a free service on the service.citroen site if you register as another professional and a member of the Citroen Owners Club and use your car VIN (VIS) at the top left to see the parts used on your car. http://service.citroen.com/do/changerParametres

 

In the parts diagrams, the undertray is shown under body work for the front of the car and is listed as underbody protection. It appears that originally fitted 90° turn buttons have been replaced with bolts and nuts done to 10 Nm and the clips they go in to have been replaced by 3 different designs. The front 3 fixings are a bolt and a caged nut which might be clipped in to the front bumper section so the nut is on the inside, the next 4 side fixings are bolts and a clip nut and the middle/rear 4 fixings are a cage bolt and nuts with the nut on the outside so the cage bolt must fasten first to the car.

[GZ100]

Great stuff, thanks for the help.