Hoover1962 Posted October 26, 2014 Posted October 26, 2014 Did the usual and read all info on the net and it just confused me.Did it this morning and it took less than 5 minutes. Jack the front up enough so you can get under easily, under the fog light under the car there is a small flap. Pull this down and you will see the back of the fogloght, disconnect the yellow plug and directly under the foglight you will see a 10mm bolt, undo this and side the unit forward through the bumper. It is easier to do this even if you want to just replace the bulb, instead of fumbling around. Slide the new unit bacl in the bumper taking note of the locating tabs either side, replace bolt and put yellow plug back, close flap. Jobs a good un Hoover Quote
paul.h Posted October 26, 2014 Posted October 26, 2014 Welcome to the forum and thankyou for the info. If you fit a new fog light then it may also need the beam height adjusting which may be possible at the back of the light from underneath. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.