Jump to content

Recommended Posts

Posted
I ran a 2.1 Xantia for seven years and was never impressed with the headlights. The Mk2's were supposed to be better than the earlier models. I replaced mine with halogen blues
Posted
1998 Xantia 1.8i 16V - I have just fitted all new lightbulbs in the headlights but I'm still not happy with the lights.

Can the lamps be adjusted?

Yes with a long allen key down through the small holes on the black plastic panel above the headlights. The holes nearest the centre adjust the height, the outer ones horizontally.

Posted

Can the lamps be adjusted?

Yes with a long allen key down through the small holes on the black plastic panel above the headlights. The holes nearest the centre adjust the height, the outer ones horizontally.

If your Xantia has had a recent MOT and it passed on headlight alignment, I would be wary about playing with the adjustment screws. All you may achieve is a failure next time around. Altering the adjustment won't improve inferior lamps - unless of course adjustment is out. But then you would know that from last MOT.

Posted

The MOT test doesn't test the lights for correct alignment, i.e. they could be pointing at the floor, it just tests to ensure they are not blinding others. To that extent I have adjusted the headlights on EVERY car car I have bought (that's quite a few by the way) as the lights invariably point down giving little forward vision on unlit roads.

 

Correct adjustment of headlight alignment is surely one of the most critical safety elements in night driving?

 

To date I'm yet to have a car fail the MOT on headlight alignment, indeed my Activa passed last Sunday having just adjusted the headlights (up) a couple of days prior to the test. Provided you are sensible when adjusting the lights, you will have no problems whatsoever.

Posted
The MOT test doesn't test the lights for correct alignment, i.e. they could be pointing at the floor,

You think so!!

 

When the car's put in front of the test rig, the lights are switched from head to dipped-beam. The dipped-beam image horizonal cut-off needs to be between the 0.5% horizontal line and the 2% line. Also the image break point has to be to the right of the zero vertical line, but to the left of the 2% line. Any beam outside these boundaries brings a fail notice.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...