Jump to content

Recommended Posts

Posted

Welcome to the forum.

 

To remove the headlight the front bumper needs removing first, undo the light electrical connector, then undo 2 bolts on the top of the light, undo a clip at the lower rear and it should be free to remove

 

The rear lamp is covered in the handbook under bulb replacement and needs 3 screws undoing:

Rear lamps

1. With the tailgate open, undo

the 3 screws located on the

side of the lens unit and pull it

rearwards to detach.

2. Disconnect the connector linking

the lens unit to the boot.

Do not disconnect the LEDs.

3. Remove the seal.

4. Remove the bulb-holder.

5. Replace the bulbs. To remove

a bulb, rotate it a quarter turn.

To fi t the bulb, rotate it a quarter

turn in the other direction.

6. Reposition the bulb-holder.

7. Put back the seal.

8. Reconnect the connector to

the lens unit.

9. Stow the harness in the opening

provided in the bodywork.

10. Reattach the lens unit on

the bodywork and do up the

3 screws.

  • 3 months later...
Posted
Could you please tell me the name and measurement of the tool to remove the bolt from the bumper?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...