andykeeton Posted August 5, 2015 Posted August 5, 2015 Hi recently changed this on my c3 and its leaking fluid from where the pipe pushes in and the retaining clip pushes down ive looked at it and it seems that the clip is not sealing it any ideas cheers Quote
andykeeton Posted August 5, 2015 Author Posted August 5, 2015 Will molykote grease be the solution does any one know cheers Quote
paul.h Posted August 15, 2015 Posted August 15, 2015 If the slave cylinder is the same stupid design as on our latest C3, the fluid supply pipe has 2 positions and 2 retaining clips. The pipe fully in one is normal (clip 3 nearest bleed screw fully in, clip 2 furthest from the screw in the out position) and the pipe out a bit is for bleeding (to bleed, push clip 2 in, pull clip 3 out, pull pipe out a bit then reverse to fit the pipe back). Quote
andykeeton Posted August 15, 2015 Author Posted August 15, 2015 lol yours sounds like a rite panto lol mine aint that complex one retaining clip one pipe lol its got a slight leak now when you press clutch pedal it seams to be pushing fluid back through where the pipe sits in slave cylinder(only now and again now) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.