Jump to content

Recommended Posts

Posted

Hi I am having trouble with the central locking not working on the wife's c3 2008 I've done all the usual when I reprogram the key the central locking works until I take the key out put in the garage same thing key works when I put it against front bottom windscreen so think it's the com 2005 unit which has the central locking receiver in it priced one at Citroen £370 can get from scrap yard or eBay for around £40 now what I need to know is do I have to match the part number with mine 96640417xt as I read somewhere or do I just need the same unit with all the same arms (indicator lights etc)as I got told by a car dismantled or does it need to be programmed in to the bsu (I think that's what they said)as that controlled everything as Citroen said

Any help or advice will be much apriciated as I've searched the web for weeks and quite a few people are having the same issue

Cheers billy

Posted

Welcome to the forum.

 

Have you tried a new battery in the key fob since if it needs holding close to the car that could be a sign the battery is low voltage or the signal from the remote is weak. You could check the battery voltage just in case you have replaced it but the new one is no good.

Posted

I have put new batteries in both keys both do the same lock the car whilst close to the area steering wheel looks like the signal is not getting picked up which after a lot of searching led me to the com 2005 unit on the steering column that has the receiver in it

 

thanks for the reply

Wouldn't be so bad but all the doors don't lock with the key or stay locked when you lock from inside and open the door

Posted

In the side of the doors behind a round sticker you should be able to use a key so they lock when closed - this is in the handbook somewhere. Try a message to coastline taxis about the different comms 2000 units since he looks after a number of Citroens and I think he may have posted in the past that you can use one from another car without it being exactly the same. He will also know if you need a diagnostic to program it to the bsi.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...