Electric Window Failure

[Jon Thevan]

Just bought a 2002 relay. Neither electric window works. Fuses are fine, control and left and right. I've changed both door switches for ones I know to be good off my scrap relay. I've also changed the brown box behind the glovebox as someone suggested that may be at fault. There's no attempt at all to move either window from either switch. No noise whatsoever.

Anyone got any ideas??

[paul.h]

Welcome to the forum.

 

You could check the wiring between the driver's door and body for damage due to flexing over the years. Then it may be a case of removing the driver's door panel and checking the motor and wiring. If you have a meter you could check for voltage at the switch and then at the motor.

[Jon Thevan]

Hi, thanks. Yes I'm new here!

I've checked wiring in the conduit between door and body and all looks ok. I've stripped the door card off and all looks ok at motor too.

Does the drivers side override the passenger side? Seems odd that neither work.

Unfortunately I don't have a multimeter and am fairly useless at the art of electrickery.

[paul.h]

Without a meter you could use a 12 volt bulb and a couple of bits of wire to check at the motor and switch