Jump to content

Electrical Gremlins


Recommended Posts

Guest Shrimper50
Posted

Hi all,have just bought an 03 C5 2.0 Hdi Exclusive and have a few electrical problems.

1/When car is unlocked all doors unlock except drivers door which I have to open by key.

2/When car is first started the STOP light comes on which coincides with the Traffic Master voice coming on.The STOP light eventually goes off after about 2 minutes.

3/When cruise control is used there is no warning light???

4/When alarm is on there is no LED to say its on???

Dont know if these are normal gremlins or have I got a Bad Un?Any advice would be greatly appreciated.

Russ

Posted

Might be worth checking if the battery voltage is ok and engine revving enough on battery to start, about 12½ volts when engine not running - could be cause of Traffic master although I have only had this when stalling the engine which also gives the stop light.

 

Does the driver's door lock with the fob or need the key, does it lock/unlock with the inside dash switch ?

 

When I lock the car with the fob there are 2 LEDS flashing - door lock and alarm (04 2.2 hdi VTR mark 1).

Guest Shrimper50
Posted

Might be worth checking if the battery voltage is ok and engine revving enough on battery to start, about 12½ volts when engine not running - could be cause of Traffic master although I have only had this when stalling the engine which also gives the stop light.

 

Does the driver's door lock with the fob or need the key, does it lock/unlock with the inside dash switch ?

 

When I lock the car with the fob there are 2 LEDS flashing - door lock and alarm (04 2.2 hdi VTR mark 1).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...