mrgaboj Posted June 14, 2015 Posted June 14, 2015 hi guysI would ask the guys who have knowledge of strange messages.I Citroen C5 mk2 2.0 HDI 06.2006.Lately I have problems with messageswhen I turn on the car tells me 3 errors in the written orderESP / ASR system faultyDEPOLLUTION system faultyCruise control system faultyIt takes placewhen I turn on the car are activated code when I arrive at destination I shut down carAfter the second ignition I have 2 the following codes turned offESP / ASR and CRUISE CONTROLAfter driving and I turn car of and after 3 ignition is turned off DEPOLLUTION error.Car no longer has the power as before. I have a feeling or I think that turbine is activates somewhere 2500-2700 rpm.But with less powerDoes anybody have any idea. Thnak you all for help and response. Quote
paul.h Posted June 15, 2015 Posted June 15, 2015 If the engine management light has come on then fault codes will be stored on the car which can be read using a code reader. This will give a good indication of what is wrong. Without reading the fault codes you could replace many parts before finding the fault. Quote
coastline taxis Posted June 15, 2015 Posted June 15, 2015 the esp cant control the torque on your engine as your in limp mode so forget about it as it will disapear when you sort the fault out.the cruse control wont work because the esp wont let it because again it cant control the torque. Sounds to me like you need the fap side of your car sorting either dpf cleaned or changed as after a drive the depollution fault goes of as its started regenerating.but cant complete the cycle. using a diagnostic go to particle filter > data > then check the soot loading and last regeneration Quote
mrgaboj Posted June 17, 2015 Author Posted June 17, 2015 (edited) thank you guys Paul.h and coastline taxisToday I was in the service car was with them for 4 hours .When you have reviewed all hoses for overpressure and low pressure turbine connection.They then examined further electrovalveThen they discovered that died SENSOR AIR FLOW .And when it was replaced the car is alive again .Thank you all for your support and another figure more Edited June 17, 2015 by mrgaboj Quote
paul.h Posted June 17, 2015 Posted June 17, 2015 Thankyou for getting back to us. You would never have suspected the air flow meter was faulty from the error messages. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.