Jump to content

Recommended Posts

Posted (edited)

Hey my neighbour asked to have a look at their car it has some problems im not citroen specialist can you please guys direct me right way what is needed to be done to fix car.Problems:

 

First Dash lights,stereo lights not working when start car , when only ignition on all lights working fine when.What causing this? 

 

Im attached diagnostic file.all these codes comes back after im earase them.Thank you

CITROEN2.pdf

Edited by SilverCloud
Posted (edited)

Hi

Unfortunately auto electrics are almost impossible to diagnose without actually having the vehicle in front of you.

Having said that, a member might just come along who has had exactly the same problem and could pinpoint it for you straight away.

Failing that, I'm afraid you are left with a long laborious chore of working your way through one system at a time looking for a short or a drain to eath.

 

Given that the lights work ok before ignition then it is safe to say that the problem could lie in the ignition switch itself or even a relay following the switch. Try the alternator, it could be shorting out as the problem only occurs when engine turning, clean the engine to body earth wire (usually on top of the gearbox).

 

Sorry I cant be more help but hopefully an electrical genius will be along soon

Edited by Rookie2
Posted

Maybe there is a problem with the dash/speedo unit or its connector or wiring. Beware if you try a used one from another car since on Citroens the mileage is stored on the ecu and also on the dash and if one is changed the car will then show the higher mileage of the dash or ecu. eg one car is 50k miles, other on 100k miles, then fit dash from 100k mile car to 50k mile one - the 50k mile car will now show 100k miles.

  • 3 months later...
Posted
Hi can anybody help me..I have a 2003 xsara Picasso 2.0hdi..just now I was driving it and engine fault light came up on dashboard and the car total cut out on me? I tried to start it up and its trying its hardest to fire but wont?? Any one have same problem or can help me thanks..it was running perfectly fine 2 minutes prior to this..
Posted

Welcome to the forum.

 

The fault could be anything that affects the exhaust emissions but since the engine light has come on there will be a fault code stored and freeze frame data of the engine sensors stored. You need a code reader to read the fault code and data and this shold tell you what is wrong. To guess what is wrong could come up with a long list and if you start replacing parts it could cost a lot before you found the actual fault. Possibilities can include the in tank fuel pump, the fuel pressure sensor, the crank shaft sensor, the cam shaft sensor, others.

 

If you do not have a code reader and do your own maintenance/repairs, then it is cheaper to buy a code reader than pay a garage to do this. Diesel cars though did not need to be OBD compliant until 2004 so you need to check that a code reader will work on your car before buying one. One that gives live data is more useful than a lower cost one without. As an example but I am not sure if it will work on your car https://www.gendan.co.uk/product_FXNT200.html

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...