crooner Posted October 10, 2016 Posted October 10, 2016 Hi, i'm going to be replacing the anti roll bar bushes on my citroen c3 14 LX year ,2004i have been able to turn the bolts so should be easy enough,but i need to know a couple of things ,first is there only one bolt holding each bush on ( i can only see one)second do i have to disconnect the end of the arm to slide the split bush into position Quote
coastline taxis Posted October 10, 2016 Posted October 10, 2016 I'm assuming the the d bushes your changing. yea its only one bolt the other end of the keep just slides in. best to take both of at the same time as it will allow the roll bar to move and give you plenty space to fit the new bushes Quote
crooner Posted October 10, 2016 Author Posted October 10, 2016 I'm assuming the the d bushes your changing. yea its only one bolt the other end of the keep just slides in. best to take both of at the same time as it will allow the roll bar to move and give you plenty space to fit the new bushes Quote
crooner Posted October 10, 2016 Author Posted October 10, 2016 Cheers for that sounds easy to do Quote
crooner Posted October 13, 2016 Author Posted October 13, 2016 Update .job done, ,droped long socket bar made up of 2 bars 18mm socket on drivers sidehad to remove air filter to get to passenger side with again 2 bars this side I had to use a shorter bar , it was quite easy from under the bonnet to loosen the bolts , hope this information helps someone Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.