renagade1 Posted October 11, 2016 Posted October 11, 2016 Hi well what I would like to know is how to set the clutch on my 2011 c5 with the egs6 gear box. Now there must be someone out there that can tell me ??? Quote
paul.h Posted October 11, 2016 Posted October 11, 2016 I am not quite sure what you are asking - do you have the clutch out of the car and are trying to fix it ? Quote
coastline taxis Posted October 11, 2016 Posted October 11, 2016 is it the dual clutch box you have and is the problem when going up through the box . if however you have changed the clutch and cant get the car to run right then there are steps you need to take before and after doing the clutch. either way you need lexia to set the clutch up right. Always fit a new electronic clutch cylinder ECP £40 or less than Citroen. On rebuild, you then depressurise the hydraulics , then bleed them (all this is done with Lexia, sitting in the car) finally you program the gearbox grid , and then on road test, carry out a procedure of pulling away fairly sharp about 10 times . This adjusts the biting point of the clutch.you nee to put a battery charger pn the battery to keep the charge up. or you can use a set of jump leads from another car. the standard battery doesn't have enough power in it to do this alone and will stop the procedure from completingSounds awkward, but it's all step by step on Lexia. before starting the job you should also depressurise the gearbox hydraulics Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.